Wlan Configuration - Endress+Hauser Proline Promass I 300 PROFINET Operating Instructions Manual

Commissioning
Parameter
Display language
Display interval
Display damping
Header
Header text
Separator
Backlight
* Visibility depends on order options or device settings
130
Prerequisite
A local display is provided.
A local display is provided.
A local display is provided.
A local display is provided.
In the Header parameter, the
Free text option is selected.
A local display is provided.
One of the following
conditions is met:
• Order code for "Display;
operation", option F "4-line,
illum.; touch control"
• Order code for "Display;
operation", option G "4-line,
illum.; touch control
+WLAN"
• Order code for "Display;
operation", option O
"Separate 4-line display,
illum.; 10m/30ft cable;
touch control"
10.6.6

WLAN configuration

The WLAN Settings submenu guides the user systematically through all the parameters
that have to be set for the WLAN configuration.
Description
Set display language.
Set time measured values are
shown on display if display
alternates between values.
Set display reaction time to
fluctuations in the measured
value.
Select header contents on local
display.
Enter display header text.
Select decimal separator for
displaying numerical values.
Switch the local display
backlight on and off.
Proline Promass I 300 PROFINET
Selection / User Factory setting
entry
• English English
• Deutsch (alternatively, the
• Français ordered language is
• Español preset in the device)
• Italiano
• Nederlands
• Portuguesa
• Polski
• русский язык
(Russian)
• Svenska
• Türkçe
• 中文 (Chinese)
• 日本語 (Japanese)
• 한국어 (Korean)
*
• ‫( ا ل ْ ع َ ر َب ي ّة‬Arabic)
• Bahasa Indonesia
*
• ภาษาไทย (Thai)
• tiếng Việt
(Vietnamese)
• čeština (Czech)
1 to 10 s 5 s
0.0 to 999.9 s 0.0 s
• Device tag Device tag
• Free text
Max. 12 characters ------------
such as letters,
numbers or special
characters (e.g. @,
%, /)
• . (point) . (point)
• , (comma)
• Disable Enable
• Enable
Endress+Hauser