Figure 101. Installation of the top cover
After this task is completed
• If necessary, install any locking device that secures the top cover, such as a Kensington lock.
• Proceed to complete the parts replacement (see
"Complete the parts replacement" on page
125).
Demo video
https://www.youtube.com/watch?v=zHg0tcinLXo
Complete the parts replacement
Go through the checklist to complete parts replacement.
To complete the parts replacement, do the following:
1. Make sure that all components have been reassembled correctly and that no tools or loose screws are
left inside the node.
.
Chapter 1
Hardware replacement procedures
125