Lenovo ThinkEdge SE350 V2 Hardware Maintenance Manual page 43

CAUTION:
The power-control button on the device and the power switch on the power supply do not turn off
the electrical current supplied to the device. The device also might have more than one power cord.
To remove all electrical current from the device, ensure that all power cords are disconnected from
the power source.
• S012
CAUTION:
Hot surface nearby.
Attention:
• Read "Installation Guidelines" on page 1
you work safely.
• Touch the static-protective package that contains the component to any unpainted metal surface on the
node; then, remove it from the package and place it on a static-protective surface.
Procedure
Step 1. Align the air baffle with its slot between the fan module and processor-heat-sink module.
CAUTION:
Hazardous moving parts. Keep fingers and other body parts away.
and "Safety inspection checklist" on page 2
Chapter 1
to make sure that
.
Hardware replacement procedures
35