Lenovo ThinkEdge SE350 V2 Hardware Maintenance Manual page 27

Figure 13. Installation of the inner rails
– If applicable, tighten the screws to secure the inner rails on the enclosure.
Figure 14. Installation of inner-rail screws
2. Lift and slide the enclosure into the rails.
– Carefully lift the enclosure and align the enclosure with the rails on the rack; then, position
the enclosure as shown and push it into the rack.
– Press the release latches.
– Push the enclosure all the way into the rack until the enclosure locks into place with a
click.
.
Chapter 1 Hardware replacement procedures
19