Lenovo ThinkEdge SE350 V2 Hardware Maintenance Manual page 39
Hide thumbs
Also See for ThinkEdge SE350 V2:
- System configuration manual (74 pages) ,
- User manual (230 pages)
Table of Contents
Advertisement
Figure 28. Installation of a power adapter into the support bracket , 2U2N enclosure
Step 3.
Connect the power adapter cable to the node.
Step 4.
Install the power cable cover onto the power adapter support bracket.
a.
For a 1U2N enclosure: align the power cable cover with the slot; then, push the cover slightly
toward the rear of the node until it clicks into place.
Figure 29. Installation of a power cable cover, 2U2N enclosure
b.
For a 2U2N enclosure: align the power cable cover with the slot; then, push the cover slightly
toward the front of the node until it clicks into place.
.
Chapter 1
Hardware replacement procedures
31
Advertisement
Table of Contents
Troubleshooting
