Chapter 11
This chapter discusses scanner calibration items required when replacing the CIS unit or other
such parts.
11.1 Calibration (Monochrome Scanner)
11.1.1
Equipments Needed for Calibration
Scanner is calibrated with the Printer's web functionality, two different types of tools on the PC
for the calibration, and an original document for calibration.
Check that the items below are all prepared.
(1) This manual
(2) Network cable
Cross cable or straight cable
(3) PC to be used for calibration
WEB browser
Scan maintenance tool, to scan original documents for calibration
Scan calibration tool, to calculate calibration values based on the calibration image
(4) Document for calibration/evaluation (3 types)
Document advance calibration document (297 x 297 mm)
Sensor connection calibration document (A1)
Evaluation document (A1)
Note
For the adjustment and check, use the document of ADJUSTER KIT(SCANNER):
U001223640** (see p. 9-241 of the Maintenance and Troubleshooting Manual).
Scanner Calibration
Figure 11.1 Equipment Needed for Calibration
11-1