Oki LP-1040 Maintenance Manual page 497

5.
Unplug the connector for the power cable
connected to MOTOR SC.
6.
Remove the three screws securing
BRACKET-MOTOR-SC.
7.
Carefully keeping the timing belt from
interfering with any other parts, remove
BRACKET-MOTOR-SC.
8.
Remove MOTOR SC with two screws from
BRACKET-MOTOR-SC.
Cautionary Notes When Performing
Installation
Install MOTOR SC on BRACKET-MOTOR-SC
so that the MOTOR SC MNT connector is at the
bottom.
9-210
MOTOR
SC
BRACKET-MOTOR-SC