9.6.6
BLADE-S-DV MNT
Note
Toner may spill while you are working. Be sure to cover the area where you are working with
some protective sheet.
<Removal>
1.
Remove the MAGNET ROLL
(see p. 9-41).
2.
Remove the BLADE-S-DV.
(a) Remove the screws (one each) on the
right and left side of the BLADE-S-DV.
(b) Remove the BLADE-S-DV completely
including the holder.
Chapter 9 Parts Disassembly, Assembly, and Replacement
BLADE-S-DV
MAGNET ROLL
BLADE-S-DV
9-43