Calibration - Oki C612 User Manual

C
ALIBRATION
ITEM
Auto Density
Mode
Adjust Density
Adjust
Registration
Color Density Cyan/Magenta/
Yellow/Black
Density
Print Tuning
Pattern
Cyan/Magenta/ Highlight
Yellow/Black
Tuning
Mid-Tone
Dark
SETTINGS
On/Off
Execute
Execute
-3,-2,-1,
0,+1,+2,+3,
Execute
-3,-2,-1,
0,+1,+2,+3,
-3,-2,-1,
0,+1,+2,+3,
-3,-2,-1,
0,+1,+2,+3,
Menu functions > 47
EXPLANATION
Selects whether density adjustment and TRC
compensation is automatically performed.
On: Density adjustment is automatically run
under the engine-specified conditions, and
reflected in TRC compensation.
Off: The printer does not voluntarily run density
adjustment.
If Execute is selected, the printer will
immediately adjust density and reflect it in TRC
compensation.
This adjustment must be executed when
the printer is idling. It can become invalid
if executed in any other state.
When this menu is selected, the printer
performs AutoAdjust Registration.
This adjustment must be executed when
the printer is idling.
Adjusts the engine density.
Prints the pattern for the user to adjust TRC.
Ordinarily, this function is not needed because
TRC is automatically adjusted to the
recommended levels through density
adjustment and TRC compensation.
Adjustment results will be reflected as offset
values (addition) to the corrections through the
Adjust Density/TRC Compensation function.
Adjusts highlight (light area) of the TRC.
+ = Darker
- = Lighter
Adjusts mid-tone area of the TRC.
+ = Darker
- = Lighter
Adjusts dark area of the TRC.
+ = Darker
- = Lighter