Oki LP-1040 Maintenance Manual page 652

Initial
No.
Value
82 6019
83 6019
84 6019
85 4013
86 6019
87 3009
88 6019
89 100
90 200
91 8832
92 1404
93 301
11-54
Unit Range
━
pps Initial value for adjustment:
Rotational speed when feeding the original
backward at 120 mm/s after scanning
━
pps Initial value for adjustment:
Rotational speed when feeding the original
forward at 60 mm/s
━
pps Initial value for adjustment:
Rotational speed when feeding the original
backward at 60 mm/s after scanning
━
pps Initial value for adjustment:
Rotational speed when feeding the original
forward at 40 mm/s
━
pps Initial value for adjustment:
Rotational speed when feeding the original
backward at 40 mm/s after scanning
━
pps Initial value for adjustment:
Rotational speed when feeding the original
forward at 30 mm/s
━
pps Initial value for adjustment:
Rotational speed when feeding the original
backward at 30 mm/s after scanning
━
msec Time from original insertion until the send
pulse motor (SM01) starts decelerating
-> The length the registration roller draws
the original (until original top edge is in the
specified position)
* The speed when the original is inserted is
fixed to 40 mm/s.
━
msec Time from original extraction request (with
front output) until the send pulse motor
(SM01) starts decelerating
━
pulse Motor pulse count from the time the original
rear edge passes the registration sensor
until the send pulse motor (SM01) starts
decelerating
-> Motor pulse count from the time the
original rear edge passes the registration
sensor until it reaches the CIS(C)
━
pulse With front output, motor pulse count from the
time the original top edge passes the
registration sensor until the original stops
nipped in the registration roller
━
pulse Motor pulse count from the time the last line
scanning is finished until the send pulse
motor (SM01) starts decelerating (scan end
-> deceleration)
Meaning
Changes
after Note
Calibration
━
━
━
━
━
━
━
━
━
━
━
━