How To Enter The Web Based Maintenance Mode - Oki LP-1040 Maintenance Manual

2.6

How to Enter the Web Based Maintenance Mode

Maintenance can also be performed on the Printer via a web browser.
To use this functionality you will need to enter maintenance mode via a web browser instead of
from the control panel.
* These instructions are the same for both printer and multifunction models.
<Instructions>
(1) Access the Printer from a web browser. The technician password input screen will be
displayed.
How to launch: Maintenance -> 8. Special Maintenance
(2) Input the username and password.
or
(It is the same password as for the engine maintenance mode.)
(1) Activate Single Points
How to launch: Menu -> PDL Settings -> HP-GL -> Drawing Parameters
Function: Specifies whether or not to print individual dots for HP-GL data.
(2) Special Settings 1
Do not change these settings.
2-58
Username: maintenance
Password: tktk2010
Username: t2t2
Password: 12325802
Off: Print individual dots (default)
On: Do not print individual dots