Pss11] Reflective Photosensor Mnt (Behind Cis Unit) - Oki LP-1040 Maintenance Manual

9.15.3

[PSS11] REFLECTIVE PHOTOSENSOR MNT (behind CIS unit)

<Removal>
1.
Close the scanner cover.
Note
Be sure to close the scanner cover here to
prevent the misalignment of:
- ROTARY-DAMPER-R and
ROTARY-DAMPER-L grooves; and
- The scanner cover protrusion.
The misalignment may occur when installing the
REFLECTIVE PHOTOSENSOR MNT.
2.
Remove the cabling from the cable clamps to
the right of the scanner cover.
3.
Remove the cover plate with two screws at
the location shown in the photo.
9-184