Print Specification Problem Solutions - Oki LP-1040 Maintenance Manual

Item
Cut length Measure the length L below:
accuracy - From the paper's front edge to the rear edge; and
- At the right edge of the paper.
Note:
- Output three pages in a row, and measure the third
- Measure at least 15 minutes after printing.
Cut Measure the lengths V1 and V2 with:
squareness - 2 block from the paper's front edge; and
- At the paper's right edge for V1 and left edge for
Then obtain the difference between V1 and V2.
Note:
- Output three pages in a row, and measure the third
- Measure at least 15 minutes after printing.
Paper output direction
7.2.2

Print Specification Problem Solutions

If the measurement value is not within the standard value range, refer to 10.3 Calibrating Print
Specification Items (p10-16) and adjust the problematic item.
7-6
Measurement Location
page.
V2.
page.
Standard Value
- A0 vertical
1189±6.0 mm
(46.81±0.24 inches)
- A1 vertical
841±4.0 mm
(33.11±0.16 inches)
- A2 vertical
594±3.0 mm
(23.39±0.12 inches)
- A3 vertical
420±3.0 mm
(16.54±0.12 inches)
- A4 horizontal
210±3.0 mm
(8.27±0.12 inches)
- A0 vertical
±3.0/841 mm
(±0.12/33.11 inches)
- A1 vertical
±2.0/594 mm
(±0.08/23.39 inches)
- A2 vertical
±1.4/420 mm
(±0.06/16.54 inches)
- A3 vertical
±1.0/297 mm
(±0.04/11.69 inches)
- A4 horizontal
±1.0/297 mm
(±0.04/11.69 inches)
Notes
Engine test
pattern 15
Engine test
pattern 15