Developer Unit; Developer Unit Mnt - Oki LP-1040 Maintenance Manual

9.6

DEVELOPER UNIT

9.6.1

DEVELOPER UNIT MNT

<Removal>
1.
Prepare the platform for the DEVELOPER
UNIT.
Note
The DEVELOPER UNIT is supported by the two
bearings on the right and left (for a total of four)
of the unit.
Find a platform that will let those bearings free.
If that is not possible, be very careful not to
damage or disrupt those bearings.
2.
Remove the top cover (see p. 9-5).
3.
Open the rear door and remove
FRM-FRONT-LOW with four screws.
Chapter 9 Parts Disassembly, Assembly, and Replacement
DEVELOPER UNIT
Platform
Platform
Bearing
FRM-FRONT-LOW
Rear door
DEVELOPER UNIT MNT
Rear door
9-35