How To Use Specific Operation - Oki LP-1040 Maintenance Manual

4.15.1

How to Use Specific Operation

Only the hardware buttons are used.
Specific operations include HDD check, HDD format and product key deletion.
The HDD check function verifies whether the installed HDD can be used or not, and format it if
it cannot be used.
The HDD format function formats the HDD regardless of its condition.
Follow the procedure below to use specific operation.
(1) Set only the DIP switch SW1 to ON and turn the printer on.
(2) The specific operation screen is displayed.
Specific operation
1. Check HDD
2. Format HDD
3. Delete Product Key
Input a number and press Enter.＿
(3) Press the number of the function to execute and press the Enter button.
Specific operation
1. Check HDD
2. Format HDD
3. Delete Product Key
Input a number and press Enter.2
(4) A confirmation screen is displayed. Press 1 and Enter to execute the function.
Specific operation
8. Start HDD format
9. Cancel
Input a number and press Enter.＿
(5) The specified function is executed.
Specific operation
Formatting HDD． ． ．
(6) The operation is complete.
Specific operation
Formatting HDD． ． ．Completed
Press any button.
(7) Press any button to return to the specific operation screen.
Specific operation
1. Check HDD
2. Format HDD
3. Delete Product Key
Input a number and press Enter.＿
Chapter 4 Controller Problems Troubleshooting
4-53