11.2 Verification (Color Scanner)
This section describes the color scanner items that need to be verified after replacing parts
such as the CIS unit.
11.2.1
Items required for verification
Color scanner verification is performed by running software tools on the computer used for
verification and using verification originals.
(1) This manual
(2) A network cable
Cross or straight cable
(3) Computer for verification
Original scanning tool (TerioStation)
Color difference analyzing tool (Patch Reader 2)
Color difference assessment tool (Color-Difference Check)
(4) Verification original (2 types)
Original for color difference verification (914×420 mm)
Original for connection verification (A1)
Note
<Verification original>
ADJUSTMENT KIT(COLOR SCANNER): U001221210** (see p. 9-242)
Copy/Scan Color Chart1 Set: U001083903** (see p. 9-242)
11.2.2
Verification Task Overview
(1) Verifying color differences
Scan the original for color difference verification using the original scanning tool.
Create color difference data using the color difference analyzing tool.
Assess color differences using the color difference assessment tool.
(2) Verifying CIS connections
Scan and copy the original for connection verification using the original scanning tool.
Check the print results and assess the connections.
Install TerioStation and Patch Reader 2 on the computer in advance referring to the
separate Installation Guides.
See subsection 11.2.3.1 on page 11-78 for requirements of the computer used for
verification.
Chapter 11 Scanner Calibration
11-77