10.8 Adjusting Paper Outlet Shutter Solenoid (SL01)
Adjust the installation angle of the paper outlet shutter solenoid (SL-01) so that upper and lower
paper outlets are switched normally.
1.
Open the fuser unit drawer.
2.
Remove the fuser cover (right) (see p. 9-14).
3.
Remove the fuser cover (right) stay with two
screws.
4.
Loosen the two screws shown in the photo.
10-56
Fuser cover (right) stay
Insert the screwdriver downward from the top.
SL01