Oki LP-1040 Maintenance Manual page 79

(2) Center Alignment
Executes a print operation for the center alignment.
Selecting Paper Position displays the EEPROM and RAM values of the
corresponding engine control parameter for the center alignment.
Use the number pad to change the RAM value.
Click the Save button to save the RAM Value in the EEPROM.
Note
Though rolls that may not be available depending on the model are also displayed as paper
position selection items, these items should be ignored.
Table 2-31 Executable Items Under the Center Alignment Menu (1)
Paper Position
Print Copies
Table 2-32 Executable Items Under the Center Regist Alignment Menu (2)
Parameter No.
EEPROM Value
2-30
◇ A confirmation window appears when you click the Save button.
When saving the new parameter, not only the value for the currently displayed
screen, but all RAM values that have been changed at this point are saved.
Item Name
Roll x
1
2
3
Item Name
701 - 704
0 - 100
Option
Roll x (x: the roll number)
Print 1 page.
Prints 2 pages continuously.
Prints 3 pages continuously.
Display
Number of engine control parameter for the center
alignment.
EEPROM value of engine control parameter for the
center alignment.
Meaning
Meaning