Fl01][Fl02] Halogen Heater - Oki LP-1040 Maintenance Manual

9.10.6

[FL01][FL02] Halogen Heater

Note
The HALOGEN HEATER has both a [FL01]MAIN and a [FL02]SUB heater, and the specifications
for each will vary depending on the destination market for the Printer.
 Japan: HALOGEN LAMP MAIN 100V-600W MNT and HALOGEN LAMP SUB 100V-600W
MNT
 North America: HALOGEN LAMP MAIN 120V-600W MNT and HALOGEN LAMP SUB
120V-600W MNT
 Europe/China: HALOGEN LAMP MAIN 230V-600W MNT and HALOGEN LAMP SUB
230V-600W MNT
<Removal>
1.
Follow steps 1 through 5 in subsection 9.10.1
to remove the fuser cover (left side) and fuser
cover (right side)
(see p. 9-12 and p. 9-14).
2.
Remove SIDE-COVER-L and
SIDE-COVER-R with one screw each.
9-98
Fuser cover (left side)
SIDE-COVER-L
Fuser cover (right side)
SIDE-COVER-R