Table of Contents
Advertisement
www.ti.com
Figure 16-8. A Slower Turn-Off Case Using a 4.7-kΩ Series Gate Resistor, and the PACK+ Connector
A fast turn-off case is shown in
and the FET gate.
Figure 16-9. A Fast Turn-Off Case with a 100-Ω Series Gate Resistor
16.6 Unused Pins
Some device pins may not be needed in a particular application. The manner in which each should be
terminated in this case is described below.
Copyright © 2021 Texas Instruments Incorporated
Shorted to the Top of the Stack
Figure
16-9, in which a 100-Ω series gate resistor is used between the DSG pin
Product Folder Links:
SLUSE91A – SEPTEMBER 2020 – REVISED FEBRUARY 2021
BQ769142
BQ769142
Submit Document Feedback
71
Advertisement
Table of Contents
