Protocol Decoding
18.1.2
Bus Setting
Set the Bus
Click or tap the drop-down button of BUS to select the desired bus. Available options
include analog channels CH1-CH4 or digital channels D0-D15. You can also self-
define the bus. Only when the digital channel probe is connected, can you select the
digital channel (D0-D15) as the bus.
Table 18.1 Bus Setting
Bus
CH1
CH2
CH3
CH4
D7-D0
D15-D8
D15-D0
D0-D7
DHO900 User Guide
196
Width
Bit X
1
0
1
0
1
0
1
0
8
0 (Default)
8
0 (Default)
16
0 (Default)
8
0 (Default)
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
Channel
Remarks
Width, Bit X, and CH are set
CH1
automatically, and you
cannot modify them.
Width, Bit X, and CH are set
CH2
automatically, and you
cannot modify them.
Width, Bit X, and CH are set
CH3
automatically, and you
cannot modify them.
Width, Bit X, and CH are set
CH4
automatically, and you
cannot modify them.
Bit0 to Bit7 are set to D7 to
D0 respectively. Width is set
D7 (Default)
automatically, and you
cannot modify them.
Bit0 to Bit7 are set to D15
D15
to D8 respectively. Width is
(Default)
set automatically, and you
cannot modify them.
Bit0 to Bit15 are set to D15
D15
to D0 respectively. Width is
(Default)
set automatically, and you
cannot modify them.
Bit0 to Bit7 are set to D0 to
D0 (Default)
D7 respectively. Width is set