Display Control; Display Type; Persistence Time; Figure 22.1 Display Setting Menu - Rigol DHO900 Series User Manual

22

Display Control

In the Display setting menu, you can set the type, persistence time, waveform
intensity, grid type, grid brightness, and etc. Click or tap the function navigation icon
at the lower-left corner of the screen, and then select Display to enter the
"Display" menu. You can also click or tap the
Waveform View to enter the "Display" menu.
22.1

Display Type

This series oscilloscope provides the "Vector" display mode in which the sample
points are connected by lines and displayed. In most cases, this mode can provide the
most vivid waveform for you to view the steep edge of the waveform (such as square
waveform).
22.2

Persistence Time

In the Display setting menu, click or tap the drop-down button of Persistence Time
to select the persistence time. The available values are Min, specific values (100 ms,
200 ms, 500 ms, 1 s, 2 s, 5 s, 10 s), and Infinite.
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.

Figure 22.1 Display Setting Menu

Display Control
icon at the upper-right of the
DHO900 User Guide
231