Pass/Fail Test; Figure 17.1 Passfail Menu; Figure 17.2 Passfail Menu-Simplified - Rigol DHO900 Series User Manual
Digital oscilloscope
Hide thumbs
Also See for DHO900 Series:
- User manual (253 pages) ,
- Quick start manual (31 pages) ,
- Quick manual (30 pages)
Table of Contents
Advertisement
17
Pass/Fail Test
During the product design and manufacturing process, you usually need to monitor
the variations of the signal or judge whether the product is up to standard. DHO900
series oscilloscope can accomplish this task perfectly with its standard pass/fail test
function. You can use this function to define the mask based on "standard"
waveforms. It compares the signal under test with the mask and displays the test
results. When the pass/fail status is detected, you can choose to stop monitoring,
sound an alarm with the beeper, or save the current screen image.
Click or tap the function navigation icon
open the function navigation. Then click or tap the Pass/Fail button to enter the
"PassFail" setting menu. You can also press the front-panel
Fail to enter the "PassFail" setting menu. The menu is as shown in the figure below.
Click or tap
the figure below.
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
Figure 17.1 PassFail Menu
to minimize the "PassFail" menu to simplify the display, as shown in
Figure 17.2 PassFail Menu-Simplified
at the lower-left corner of the screen to
key and select Pass/
Pass/Fail Test
DHO900 User Guide
189
Advertisement
Table of Contents
