Rigol DHO900 Series User Manual page 271

After setup, click or tap the
save the waveform based on the settings. The location where the file is saved
depends on the File Path setting in Storage menu. For details, please refer to
a File
.
Save Setup
Click or tap Save Setup, then Operation is set to "Save Setup".
After setup, click or tap the
save the setup file suffixed with ".stp". The location where the file is saved depends on
the File Path setting in Storage menu. For details, please refer to
All Measurements
• Click or tap All Measure, then Operation is set to "All Measure".
• In All Measure item, click or tap the drop-down button to select the channel
(CH1-CH4) to measure.
After setup, click or tap the
perform the measurement on the specified channel.
Reset Statistics
• Click or tap Stat Reset, then Operation is set to "Stat Reset".
• Click or tap "Measure" or "Pass/Fail" under Stat Reset to reset all statistics of the
"Measure" or "Pass/Fail" function.
After setup, click or tap the
This resets all statistics of the specified function in the Result sidebar at the right side
of the screen and starts the measurements again.
Waveform Recording
Click or tap Record, then Operation is set to "Record".
After setup, click or tap the
perform the waveform recording.
Save Group
• Click or tap Save Group, then Operation is set to "Save Group".
• Under Save Group, select one or more items from "Save Image", "Save Wave",
and "Save Setup".
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
System Utility Function Setting
key at the upper-right corner of the front panel to
key at the upper-right corner of the front panel to
key at the upper-right corner of the front panel to
key at the upper-right corner of the front panel.
key at the upper-right corner of the front panel to
To Save
To Save a File .
DHO900 User Guide
255