Data Source
Clock Source
Trigger Type
Click or tap the drop-down button of Type to select "Setup/Hold".
After a trigger type is selected, the current trigger setting information (including the
trigger type, source, and level) is displayed in the trigger information label at the top
of the screen, as shown in the figure below. The information will change based on the
trigger settings.
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
T2
T1
Edge
Figure 8.20 Setup/Hold Trigger
Figure 8.21 Setup/Hold Trigger Setting Menu
Triggering the Oscilloscope
T1 is the setup time
T2 is the hold time
The data type is H
DHO900 User Guide
91