Figure 8.7 Slope Trigger Setting Menu - Rigol DHO900 Series User Manual

After a trigger type is selected, the current trigger setting information (including
trigger type, trigger source, and trigger level) is displayed in the trigger information
label at the top of the screen, as shown in the figure below. The information will
change based on the trigger settings.
Source Selection
Click or tap the Source drop-down button to select CH1-CH4. For details, refer to
Trigger Source
label at the top of the screen.
Only when you select the channel that has signal inputs as the trigger source, can you
obtain a stable trigger.
Edge Type
Select the input signal edge (in the Slope item) on which the oscilloscope triggers.
• Rising: triggers on the rising edge of the input signal.
• Falling: triggers on the falling edge of the input signal.
Trigger Condition
Set the trigger condition in the When item.
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.

Figure 8.7 Slope Trigger Setting Menu

. The selected trigger source is indicated in the trigger information
Triggering the Oscilloscope
DHO900 User Guide
71