Rigol DHO900 Series User Manual page 39

- If the channel is not displayed, you can press the channel key to open the
- If the channel is displayed but not selected, you can press the channel key to
- If the channel is both displayed and selected, you can press the channel key
12. Probe Compensation Signal Output Terminal/Ground Terminal
This terminal outputs the probe compensation signal which helps you match a
probe's input capacitance to the oscilloscope channel to which it is connected.
13. Analog Channel Input Terminals
BNC connectors. Attach probes to these connectors for analog signal inputs.
14. Digital Channel Input Terminal
Attach logic probes to the interface for digital signal inputs.
15. USB HOST Port
This series supports USB storage device of FAT32/NTFS format and mouse.
- USB storage device: imports or exports data (software update, waveform,
setup, or captured image).
- Mouse: connects a mouse to control the instrument.
16. Power Key
Powers on/off the oscilloscope.
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
channel in the waveform view window.
select the channel.
to close its display in the waveform view.
Quick Start
DHO900 User Guide
23