Vertical System; To Enable Or Disable The Analog Channel; Figure 5.1 Vertical Menu - Rigol DHO900 Series User Manual

5

Vertical System

This series oscilloscope provides 4 analog input channels (CH1-CH4), and each
channel is equipped with an independent vertical control system. The setting
methods for their vertical systems are the same. This chapter takes CH1 as an
example to introduce the setting method for the vertical system.
When a channel is selected, click or tap the channel status label at the bottom of the
screen. Then the menu as shown in the figure below is displayed.
5.1

To Enable or Disable the Analog Channel

Enable the Analog Channel
When a signal is connected to CH1, you can enable the channel in the following ways.
• Click or tap the channel status label at the bottom of the screen to enable the
channel.
• Press the front-panel
key is illuminated.
Figure 5.1
• In
CH1 on or off.
When CH1 is activated, its status label at the bottom of the screen is as shown in the
figure below.
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.

Figure 5.1 Vertical Menu

key to enable the channel, and the backlight of this
, select the CH1 tab. Click or tap the Display on/off switch to turn
Vertical System
DHO900 User Guide
37