Other Parameters - Rigol DHO900 Series User Manual

Digital oscilloscope
Hide thumbs Also See for DHO900 Series:
Table of Contents

Advertisement

Measurements
Wherein,
11. VRMS: indicates the root mean square value on the whole waveform or in the
gating area. The formula is as follows:
Wherein,
points being measured.
12. Per.VRMS: indicates the root mean square value within a period. The formula is
as shown above.
13. Overshoot: indicates the ratio of the difference between the maximum value and
the top value of the waveform to the amplitude value.
14. Preshoot: indicates the ratio of the difference between the minimum value and
the base value of the waveform to the amplitude value.
15. AC RMS: indicates the root-mean-square value of the waveforms, with the DC
component removed. The formula is shown as follows:
Wherein,
value, and
10.2.1.5

Other Parameters

Positive Slew Rate: On the rising edge, first calculate the difference between
the high value and the low value, then use the difference to divide the
corresponding time value to obtain the positive slew rate.
Negative Slew Rate: On the falling edge, first calculate the difference between
the low value and the high value, then use the difference to divide the
corresponding time value to obtain the negative slew rate.
Area: indicates the area of the whole waveform within the screen. The unit is
V*s. The area of the waveform above the zero reference (namely the vertical
offset) is positive, and the area of the waveform below the zero reference is
negative. The area measured is the algebraic sum of the area of the whole
waveform within the screen.
Period Area: indicates the area of the first period of waveform on the screen.
The unit is V*s. The area of the waveform above the zero reference (namely the
vertical offset) is positive, and the area of the waveform below the zero
DHO900 User Guide
140
x
ith point, and n is the number of points being measured.
is the
i
RMS
x
is the measurement result of the
i
S
td
.
Dev
=
x
is the amplitude of the
i
n is the number of points being measured.
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
n
2
x
i
i
1
=
=
n
ith point, and n is the number of
n
2
(
x
Average
)
i
i
1
=
n
ith point, Average is the waveform average

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dho914Dho914sDho924Dho924s

Table of Contents