Figure 7.4 Xy Menu - Rigol DHO900 Series User Manual
Digital oscilloscope
Hide thumbs
Also See for DHO900 Series:
- User manual (253 pages) ,
- Quick start manual (31 pages) ,
- Quick manual (30 pages)
Table of Contents
Advertisement
Enable the XY Mode
You can enable the XY display mode in the following ways.
•
Click or tap the Windows button in the function navigation menu or on the
toolbar to enter the Add Window menu. In the "Diagram" item, click or tap XY >
Add to enable the XY display mode.
•
Click or tap the XY button in the function navigation menu or on the toolbar to
enable the XY display mode.
•
In the "Horizontal" menu, tick XY to enable the XY mode.
Configure the XY Mode
Click or tap
configuration menu.
•
Source: Click or tap the drop-down button of "Source X" to select the source
channel of the X-axis in the XY window. Click or tap the drop-down button of
"Source Y" to select the source channel of the Y-axis in the XY window.
In the Add Window menu, you can also configure Source Z. Source Z, as the Z-
axis input in the XY display mode, is used to control whether to display the X-Y
waveforms in the XY display mode. This function is called "blanking".
-
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
at the upper-right corner of the XY display window to enter the XY
Figure 7.4 XY Menu
When "None" is selected for "Source Z", the blanking function is disabled,
and you can only see the X-Y waveforms.
Acquisition System
DHO900 User Guide
59
Advertisement
Table of Contents
