Table of Contents
Advertisement
5.7 Unit on casters: Secure device to the wall
Prerequisite Wall must be designed for a tensile force of at least 0.6 kN.
The safety rope for securing must be shorter than the connecting
cables of the device.
1. Place the unit in the intended position and in the casters stops.
2. Guide the arresting wire to the wall to determine the correct
position of the wall mounting.
Safety rope and wall mounting are not part of the scope of
delivery.
3. Mark the position of the wall mounting.
4. Fix the wall mounting to the wall using the material suitable for the
wall in question.
5. Observe the manufacturer's specifications for the fastening
material.
6. After completing the work, check the safety function.
Installation instructions
Installing the unit
31
Advertisement
Table of Contents
