Table of Contents
Advertisement
Connecting the unit
6.4 Making the water connection
CAUTION
NOTICE
INFORMATION
INFORMATION
42
Drinking water installation tasks
Drinking water installation tasks on drinking water lines and the unit
may only be performed by a specialist company, which is approved
by the drinking water utility company in the particular region. The
applicable regional regulations, standards and guidelines must be
observed, as well as the connection conditions imposed by the
drinking water utility company responsible.
Technical qualifications for drinking water installation tasks
Drinking water installation tasks on drinking water lines and the unit
may be carried out only by a water specialist provided by the
specialist company contracted.
The unit has a connection for permanent installation to the drinking
water supply.
The unit is equipped with a permanent connection for:
•
Softened drinking water for steam generation
•
Drinking water for cooling, rinsing and cleaning
Hygiene risk from contaminated drinking water
• The connection to the drinking water supply must be equipped with a back-
flow preventer.
Risk of property damage from the wrong water quality
• Ensure that the water quality complies with the unit and connection data.
The unit can be connected to a reverse osmosis system.
The material of the connection line from the reverse osmosis system to the
unit must be suitable.
Always connect both water connections to the unit.
Installation instructions
Advertisement
Table of Contents
