Table of Contents
Advertisement
Connecting the unit
Prerequisite Unit disconnected from power supply
38
d
c
Image: Connecting the electrical connection line
a Connection terminals
b Cable ties
Electrical connection line dead
Unit adjusted to supply voltage
Side wall open
1. Feed the electrical connection line into the unit through the
threaded cable connection.
2. Connect the power connection cable in accordance with the wiring
diagram.
3. Secure the electrical connection line with cable ties.
4. Tighten the threaded cable connection securely to provide strain
relief.
5. Close the housing (see "Opening and closing the housing").
6. Fill out the Start-up operation report.
Installation instructions
b
c Electrical connection line
d Threaded cable connection
a
Advertisement
Table of Contents
