Table of Contents
Advertisement
6.5.3 Connecting a waste water line with an unobstructed discharge
INFORMATION
Prerequisite The waste water line complies with the specifications (see "Unit and
b
a
c
d
Image: Connecting a waste water line with an unobstructed discharge
a Waste water connection
b Waste water line
c Funnel waste trap
Connect only the discharge funnel if a waste water trap is installed in the
waste water system.
connection data")
1. Connect the discharge funnel with waste trap to the sewer system.
2. Connect the waste water line to the unit and extend it to the
discharge funnel.
3. Secure waste water line with pipe clamps.
4. Install outlet of the waste water line 20 mm above the discharge
funnel.
5. Fill the discharge funnel with tap water.
6. Fill out the Start-up operation report.
Installation instructions
Connecting the unit
b
f
a
e
d
d Waste water system
e Waste water system siphon
f Discharge funnel
47
Advertisement
Table of Contents
