Table of Contents
Advertisement
Installing the unit
5.6 Units with casters: Securing the unit to the wall
Prerequisite Wall capable of 0,6 kn pulling force
24
Tether must be shorter then the length of the water- , electric-, or
wastewater connection
1. Place the unit into the final position using the caster stops.
2. Mark the right place on the wall for the wall fastener (not included)
holding the tether.
3. Using the required hardware depending on the wall, fasten the
wall fastener to the wall.
4. Follow the manufacturer´s instructions regarding the hardware.
5. After fastening the tether, move the unit to check, if the
connections will be secured by the tether.
Installation instructions
Advertisement
Table of Contents
