Chapter 3: System Setup; Removing The Chassis Cover - Nexcom FTA 1170 Series User Manual

Chapter 3: System Setup

C 3: s
haPter ystem

Removing the Chassis Cover

Prior to removing the chassis cover, make sure the unit's power
CAUTION! CAUTION! CAUTION! is off and disconnected from the power sources for 20 seconds
to prevent electric shock or system damage.
Copyright © 2023 NEXCOM International Co., Ltd. All Rights Reserved.
s
etuP
20
1. The screws located on the rear panel and used to secure the cover to
the chassis. Remove these screws and put them in a safe place for later
use.
2. With the screws removed, gently slide the cover outwards and then lift
up the cover to remove it.
FTA 1170 Series User Manual