Linking The Next Transition Selection Buttons; Assigning A Region To The Region Selection Buttons In The Numeric; Keypad Control Block Or Multifunction Flexi Pad Control Block - Sony MVS-8000 User Manual

Hide thumbs Also See for MVS-8000:

Table of Contents

Linking the Next Transition Selection Buttons

To the transition links between keyers, you can add a link for the next transition

selection buttons in the transition control block. The effect of this additional

link is such that if for example, two keyers (Key 2 and Key 3) are linked with

the master keyer (Key 1), pressing the [KEY1] next transition selection button

also selects the [KEY2] and [KEY3] buttons.

Selecting the Module to be the Reference for Device

Control Block

In the <Reference Module> group of the Panel >Config menu, select the

module to be the reference.

Assigning a Region to the Region Selection Buttons in

the Numeric Keypad Control Block or Multifunction

Flexi Pad Control Block

You can set a maximum of four regions to each of the region selection buttons

in the numeric keypad control block or Multifunction Flexi Pad control block.

In the Multifunction Flexi Pad control block, pressing the region selection

button [MORE] displays the regions not assigned to the region selection

Overall Control Panel Settings (Config Menu)

Set the transition links between keyers.

For details of the operation, see the previous section "Linking Transitions

Between Keyers."

Press [Next Trans Link], turning it on.

The [KEY1], [KEY2], [KEY3], and [KEY4] next transition selection

buttons in the transition control block are now selected coupled to the

settings in the Key Trans Link menu for transition links between keyers.

These settings apply to the whole Key Trans Link menu. It is not possible

to make separate settings for each master keyer.