Exporting Source Names And Destination Names - Sony MVS-8000 User Manual

2
Using any of the following methods, select the table.
• Press directly on the list on the right of the status area.
• Press the arrow keys on the list on the right to scroll the reverse video
cursor.
• Turn the knob.
Knob
3
3
Press [Table Assign Set].
This sets the table for the selected switcher bank or bus.

Exporting Source Names and Destination Names

To send the source names and destination names to the S-Bus, use the
following procedure.
1
In the Panel >XPT Assign menu, press [Name Export].
The Name Export menu appears.
2
Turn the knob to set the station ID.
Knob
1
a) If set to 255, the information is sent to all stations (with display of "All").
3
Press [Src Name Export].
This exports the source names to the station selected in step 2.
4
Press [Dest Name Export].
This exports the destination names to the station selected in step 2.
Notes
Since destination names cannot be selected freely, fixed names are used.
Parameter
Table No
Parameter Adjustment
Station ID Station ID setting
Adjustment Values
Selection of table 1 to 15
to be assigned
Setting values
1 to 255
Cross-Point Settings (Xpt Assign Menu)
a)
1157