Knob Parameter
1
Port
3
In the <Trigger Type> group, select the trigger type.
(Rising Edge): Apply the trigger on a rising edge of an input pulse.
(Falling Edge): Apply the trigger on a falling edge of an input
pulse.
(Any Edge): Apply the trigger on a change in the polarity of the
input signal.
(Level): Carry out the specified operation when the input is low or
high.
No Operation: Apply no trigger on an input pulse.
4
In the <Target> group, select the action block.
M/E-1, M/E-2, M/E-3, P/P: Set the action for one of the banks.
Common/Setup: Set an action for something other than the above, or a
setup action.
5
Using any of the following methods, select the action to be set.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knobs.
Knob Parameter
2
Action
4
Aux Bus No
5
Reg No
5
Src No
5
No
a) As for the setting values, see "Selectable actions for various trigger types" (page 1180).
b) When knob 2 selection is "Aux ? O'ride Src ??"
c) When knob 2 selection is "Key Snapshot"
d) When knob 2 selection is "Snapshot" or "Shotbox"
e) When knob 2 selection is "Macro"
f) When knob 2 selection is "Effect"
g) When knob 2 selection is "Prefs Button?"
6
Press [Action Set] to confirm the action selection.
Adjustment
Port selection
Adjustment
Action selection
AUX bus selection
Register number
Source signal selection
User preference button
selection
Interfacing With External Devices (Device Interface Menu)
Setting values
1 to 8
Setting values
a)
1 and upwards
b)
1 to 48
c)
1 to 4
d)
1 to 99
e)
1 to 250
f)
1 to 399
b)
1 and upwards
g)
1 to 16
1179