Dme - Sony MVS-8000 User Manual

DME

DME (Digital Multi Effects) allows you to add three-dimensional effects such
as image movement, rotation, magnification and shrinking, as well as a wide
variety of special effects. DME is the general name for all of these effects.
You can use up to eight channels as dedicated DME channels.
Each channel can be used on its own or in combination with other channels,
which allows you to create advanced effects with more complexity.
Functions that can be used differ with the models of DME. For details, see
"Functional Differences With Models of DME" (page 1042).
MVE-8000A Multi Format DME Processor
The MVE-8000A is a "Digital Multi Effects" with multi-format support.
For the MVE-8000A, a dedicated interface (MKE-9020M) is available to
enable the MVE-8000A to be used in an MVS-8000 series switcher.
Installation of an optional MKE-8021A Input/Output Board in the MVE-
8000A provides an SDI interface.
Notes
When using the SDI interface, the following operations are required.
• Setting the interface between the MVE-8000A and the switcher.
See "Setting the Interface Between the DME and the Switcher" in Chapter
20 (Volume 3).
• Setting the input signals from the switcher to the MVE-8000A (AUX bus
outputs), and signals returned to the switcher as primary inputs (reentry
inputs). However, "Ext In" cannot be set for the DME channel.
See "Setting the AUX Bus Output and Reentry Input" in Chapter 20 (Volume
3).
• Selecting the combiner channels not in the key control block, but in the
Global Effect menu.
See "Combiner Settings" (page 737).
MVE-9000 Multi Format DME Processor
The MVE-9000 is a "Digital Multi Effects" with multi-format support.
572
DME