Continuously Capturing Still Images (Record) - Sony MVS-8000 User Manual

The Reposition menu appears. In this menu, you can also enable the V/K
mode (see page 387).
2
In the frame memory selection area, select the FM output (see page 386).
3
In the <Reposition> group, select the movement mode.
Normal: Move in normal mode.
Black&White: Move in black & white mode.
4
With the knobs, adjust the parameters to move the image.
Knob
1
2
a) See page 302.
The surroundings of the moved image on the screen are filled with black.
5
To return the image moved by the reposition function to the center
position, in the <Reposition> group press [Center].
Fixing the output image selection (lock function)
For the output of each of FM1 to FM8, this fixes the image at the current
output. When this lock is enabled, even if the output is recalled in a snapshot
or keyframe, the images output to FM1 to FM8 are preserved.
1
In the Frame Memory menu, select VF3 'Reposition/Lock' and HF2
'Lock.'
The Lock menu appears.
2
In the frame memory selection area, select the FM output. (See page 386.)
3
Press [Lock], turning it on.
This fixes the currently selected frame memory output image.
To release the lock, set [Lock] to off.

Continuously Capturing Still Images (Record)

You can continuously capture (freeze) a sequence of input video frames and
store the sequence of the still images over a specified time interval.
Parameter Adjustment
Position H Move in horizontal direction –200.00 to +200.00
Position V Move in vertical direction
Setting values
a)
a)
–200.00 to +200.00
Still Image Operations
399