Sony MVS-8000 User Manual page 400

Hide thumbs Also See for MVS-8000:

Table of Contents

The name of each image recorded in this way consists of a first character string

followed by a second string.

First character string: A common part of name assigned to all the still images

Second character string: A four-digit number (0000 or greater), which is

• When using the record function to continuously capture frames, it is not

possible to use the mask function.

• On the MVS-8000, the image file name is "anmxxyyy" ("anm" is constant,

"xx" is a two-digit number from 00 to 99 incremented by 1 for ever recording

operation, and "yyy" is a three-digit number from 000 to 999, incremented

by 1 for each captured image).

Continuously freezing input images and writing to memory

Still Image Operations

captured in one record operation. This string includes a maximum of four

characters, which can be specified using a menu before carrying out the

capture. The first string is automatically used as the clip name when the

images are treated as a frame memory clip.

incremented each time a still image is captured.

In the Frame Memory menu, select VF1 'Still' and HF4 'Animation

The Animation Record menu appears.

Select the desired frame memory.

For details of the operating procedures, see "Selecting outputs (FM) and

target frame memory" (page 385).

To use V/K mode, press [V/K Mode], turning it on.

Press a button in the frame memory folder selection area, to select the

folder to hold the freeze image.

For details of the selection method, see page 386.

The folder selected here is the destination folder for writing the freeze

It is not possible to change the selection of this folder after the following

An orange bar appears on the selection button for the destination folder.