Sony MVS-8000 User Manual page 902

Displayed
character codes
1, 2, 3, 4
U1, U2
D2
FvFkBvBk
Aux
Mon
Fm1, Fm2
Ccr1, Ccr2
RTR
When an effect dissolve is set:
Displayed
character codes
Duration value
When an auto transition is set:
Displayed
character codes
T
When a GPI output is set:
Displayed
character codes
Port number
When a clip event is set:
Displayed
character codes
On
902
Snapshot Operations in the Menus
Attributes set
Cross-point hold is set for key bus 1, 2, 3, or 4.
Cross-point hold is set for the utility 1 or utility 2 bus.
Cross-point hold is set for video bus selected for 2nd DME
channel.
Cross-point hold is set for all of the DME front video bus, DME
front key bus, DME back video bus, and DME back key bus.
Cross-point hold is set for one of the AUX buses.
Cross-point hold is set for one of the monitor buses.
Cross-point hold is set for one of the frame memory 1 and 2
buses.
Cross-point hold is set for one of the CCR 1 and 2 buses.
Cross-point hold is set for the Router region.
Attributes set
The effect dissolve attribute is set, with the displayed duration.
Attributes set
Auto transition is set.
Attributes set
GPI output is set for the port of the displayed number.
Attributes set
Clip event is set.