Sony MVS-8000 User Manual page 613

• 16:9 mode
Knob
1
2
3
5
Knob
1
2
3
4
5
Setting the border color
The operation differs depending on the DME used (MVE-8000/8000A or
MVE-9000).
When the MVE-8000/8000A is used
Press [Border Color], turning it on, and set the following parameters.
Knob
1
2
3
When the MVE-9000 is used
Use the buttons in the <Border Fill> group to select the signal to insert in the
border.
Flat Color: single color
Mix Color: mix color signal set in the Color Mix menu (see page 638)
Ext Video: an external video signal input to the Ext IN connector
If Flat Color is selected, adjust the following parameters.
Parameter group [1/2]
Parameter Adjustment
H Border width on left and right
sides
V Border width on top and bottom
sides
All Border width on all sides
Density Border density
Parameter group [2/2]
Parameter Adjustment
Top Border width on top side
Left Border width on left side
Right Border width on right side
Bottom Border width on bottom side
Density Border density
Parameter Adjustment
Luminance Luminance
Saturation Saturation
Hue Hue
Setting values
Left value shown
Top value shown
Left value shown
0.00 to 100.00
Setting values
–4.50 to +4.50 (SD)
–18.00 to +18.00 (HD)
–8.00 to +8.00 (SD)
–32.00 to +32.00 (HD)
–8.00 to +8.00 (SD)
–32.00 to +32.00 (HD)
–4.50 to +4.50 (SD)
–18.00 to +18.00 (HD)
0.00 to 100.00
Setting values
0.00 to 100.00
0.00 to 100.00
359.99 to 0.00
DME Special Effect Operations
613