Sony MVS-8000 User Manual page 1343

Icon Title Message
Internal The system data partition of
Error: hard disk drive is damaged.
Temporary The hard disk drive needs to be
HDD reformatted. Please execute
HDD format on Page 7317.
Please make sure to save all
data in the user data partition
of hard disk drive to any other
device or media, before
reformatted.
Invalid Empty...
Name
The file exists already...
Loading Target File: XXXXX
Texture Failed to load target bmp file./
Pattern Illegal Name.
This operation is canceled.
Target File: XXXXX
Failed to load target bmp file./
Illegal Size.
This operation is canceled.
Make Texture file: XXXXX
Package Not Found.
This texture file does not exist
on the removable disk.
This operation is cancelled,
because capacity is full.
Please clear texture pattern.
Password Password Incorrect
Record Cannot be executed.Maximum
number of clips are created.
Description
When starting up the menu system, an error
was found on the hard disk.
In Menu 7317: Engineering Setup >System
>Maintenance, execute [HDD Format].
2512: Frame Memory >Still >Freeze/Store
In the above menu, a Store was carried out
without specifying a name.
Alternatively:
71XX: File Menu
7171: File >Configure >Directory
In the above menu, when renaming a file or
creating a directory, the name was not entered.
Enter the name correctly.
2512: Frame Memory >Still >Freeze/Store
In the above menu, the file name specified for a
store operation already exists in the switcher.
Specify a different name.
7316.9: Engineering Setup >System >Install/
Unit Config >Texture Package
In the above menu, an error occurred when
loading a texture file. Delete texture files with an
illegal size or illegal file name, then try again.
7316.9: Engineering Setup >System >Install/
Unit Config >Texture Package
In the above menu, when loading an already
created texture package, a texture file within the
texture package was not found.
7316.9: Engineering Setup >System >Install/
Unit Config >Texture Package
In the above menu, when making a texture
package, there was insufficient space on a
memory card.
7317.1: Engineering Setup >System
>Maintenance >Setup Operation Lock
In the above menu, the wrong password was
entered.
Enter the correct password.
2523: Frame Memory >Clip >Record
In the above menu, an attempt was made to
execute [Rec Start] but the number of recorded
clips had already reached its upper limit.
1343
Error Messages