Restrictions In 3D Mode; Video Creation In 3D Mode - Sony MVS-8000 User Manual

Restrictions in 3D Mode

In 3D mode, the following restrictions apply, because the switcher and DME
hardware is operating in tandem (link A and link B).
Restrictions
Functions that cannot be used
in the system
Functions that cannot be used
in the switcher
Functions that cannot be used
on the DME
Other restrictions
a) When the simple P/P software is not installed

Video Creation in 3D Mode

Adjusting the parallax using the DME
By adjusting the parallax, you can control the degree of depth perception.
For more about parallax, see "How the 3D display works" (page 511).
1
2
3
518
3D Support
Display the Global Effect >Ch1 to Ch4 >3D Mode menu.
Press [Parallax].
Turn the knobs to adjust the following parameters.
Knob Parameter
1 1ch Parallax
Details
Functions of the following items in the Engineering
Setup >Switcher >Config menu
Single Simul, Dual Simul
• 41 or more signal inputs
• 25 or more signal outputs
• Monitor buses 2/4/6/8
• M/E-2 bank a)
• M/E-3 bank
• DME utility buses 1, 2
• Color corrector 2
• Format converter
• Functions of the following item in the Engineering
Setup >Switcher >Config menu:
Logical M/E Assign
• DME channels 3, 4, 7, 8
• DME monitor output numbers 3 and 4
• Editor ports 3 and 4 when the editor port operation
mode is set to "Independent"
• Auto chroma keying is carried out on the left
image.
• Tallies are generated based on the left signal in the
PGM/PST bank.
Setting
Adjust the parallax for channel 1
Values
0.00 to 8.00