Assigning The Function To Disable Cross-Point Button Operations To A; Button; Assigning The Aux Bus Control Mode Switching Function - Sony MVS-8000 User Manual

Hide thumbs Also See for MVS-8000:

Table of Contents

Assigning the Function to Disable Cross-Point Button

Operations to a Button

Assigning the AUX Bus Control Mode Switching

You can switch the cross-point control block of the CCP-6224/6324 control

panel to AUX bus control mode (AUX panel-less function). You can display

the names of the sources or buses for the AUX buses in the source name

The function for switching to AUX control (AUX Ctrl) mode is assigned to the

[PRE MCRO] button. And the function for switching the source name displays

to the names of the sources or buses for the AUX buses is assigned to the

[POST MCRO] button.

Overall Control Panel Settings (Config Menu)

Select the setting target (M/E-1 to M/E-3 or P/P) in the status area.

Select [Utility/Shotbox] in the <PRE MCRO/POST MCRO> group.

This assigns the utility/shotbox mode to the [PRE MCRO] button, and

disables the [POST MCRO] button.

In the Panel >Config menu, press [Link/Program Button].

The Link/Program Button menu appears.

Press [Xpt Module].

The Xpt Module menu appears.

Using any of the following methods, select the bank.

• Press directly on the list in the status area.

• Press the arrow keys to scroll the reverse video cursor.

• Turn the knob.

Bank selection

Press [Inhibit Set].

This assigns the function to disable cross-point button operations to the

[PRE MCRO] button.

Setting values