Sony MVS-8000 User Manual page 817

Hide thumbs Also See for MVS-8000:

Table of Contents

Press the button corresponding to the region you want to select, turning it

You can also press more than one button.

[M/E 1], [M/E 2], [M/E 3], [P/P]: These select the corresponding M/E-1,

M/E-2, M/E-3, and PGM/PST regions.

[USER 1] to [USER 8]: These select the User regions.

[DME 1] to [DME 8]: These select the DME channels.

[DEV 1] to [DEV 12]: These select the regions Device 1 to Device 12,

respectively.

[P-BUS]: This selects P-Bus.

[GPI]: This selects GPI.

[MCRO]: This selects Macro.

[ALL]: This selects all valid regions.

[MASTR]: This selects the master timeline (see "Creating and Saving a

Master Timeline Using the Buttons in the Numeric Keypad Control

Block" (page 859)).

The regions that can be selected simultaneously are those assigned to the

region selection buttons in the numeric keypad control block. (See

"Assigning a Region to a Region Selection Button in the Numeric Keypad

Control Block or Multifunction Flexi Pad Control Block" in Chapter 19

(Volume 3).)

It is not possible to select [MASTR] and other regions simultaneously. If

selected simultaneously, the master timeline takes precedence.

The first button pressed lights green as the reference region, and any

subsequently pressed buttons light amber.

Pressing one of the amber-lit buttons, while holding down [EFF], turns the

button green to indicate its corresponding region as the new reference

For details of the precedence order for becoming the reference region, see

"Reference region" (page 795).

The display shows the name of the reference region, and the number of the

last register recalled for this region.

Enter the number of the register you want to recall, using the numeric

To find an empty register, instead of entering a number, press the [.]

(period) button. To search for an empty register common to all currently

selectable regions, press the [.] button again.

To search for an empty register in the 100 range, press [1], [0], [0], [.]

(period) in this order. Similarly, to search for an empty register in the 200

Recalling a Register