Interchanging The Bank Order Or Disabling Operation - Sony MVS-8000 User Manual

Hide thumbs Also See for MVS-8000:

Table of Contents

• Compact Key Module Assign: You can select which keys can be operated

with an independent key transition control block (simple type).

• M/E Operation Inhibit: For each M/E or PGM/PST bank, enable or inhibit

utility 2 bus-related and key-related operations.

• Joystick/Trackball Module: Enable or inhibit DME channel selection

operations from the device control block (trackball) or device control block

• Xpt Module: You can assign the function for dual background bus mode

switching, the function for AUX bus control mode switching, and the

function for disabling cross-point button operations to the [PRE MCRO] and

[POST MCRO] buttons in the cross-point control block.

• Multi Function Module: You can assign functions to the buttons in the

various parts of the Multifunction Flexi Pad control block.

• Extension Panel: You can assign an M/E bank to the MKS-8010B System

Control Unit interface port.

Interchanging the Bank Order or Disabling Operation

In the Panel >Config menu, select the Bank you want to set, using any of

the following methods.

• Press directly on the status area display.

• Press the arrow keys to scroll the reverse video cursor.

• Turn the knob.

The Bank selection here indicates the physical position on the control

panel, numbering from the top as the 1st Row, 2nd Row, 3rd Row, and 4th

Select the bank that you want to assign to the selected Bank number in the

<M/E Assign> group.

The status area shows the interchanged state of the banks.

• It is not possible to assign the same M/E logical bank to more than one

physical bank. Be sure to make different M/E assignments.

• When the bank order is changed, the state of region selection button

assignment in the numeric keypad control block also changes

correspondingly.

Select the position of the bank you want

Overall Control Panel Settings (Config Menu)

Setting values