Firmware System Mitel Sip-Dect - Mitel MiVoice Office 400 System Manual

DECT cordless phones Office 135 and Office 160
The firmware for the Office 135 and Office 160 cordless phones, is updated via radio (Air-Download). This
requires the cordless phone to be logged on to system A.
The memory in the cordless phones is a Flash memory. The Flash memory contains an area that cannot
be modified. This area contains the cordless phone's boot software.
The firmware for the cordless phones is contained in the MiVoice Office 400 application software package.
The loaded firmware is tested when the cordless phone starts up. If the loaded firmware is not identical to
the version in the system software, the system will initiate an Air-Download. The firmware is loaded from
the communication server onto the cordless phones via radio and stored in the Flash memory.
To be able to run an Air-Download, you need to ensure that the cordless phone contains a functional
firmware.
The cordless phone remains fully functional during an Air-Download. The new loaded firmware is activated
only once the Air-Download has been successfully completed. A restart is carried out on the cordless
phone.
6.2.4

Firmware System Mitel SIP-DECT

With Mitel SIP-DECT and Mitel 600 DECT series phones comprehensive solutions can be provided for
wireless telephony on IP-based networks. This requires RFP radio units that can be directly connected to
other VoIP devices on the LAN. OpenMobilityManager (OMM) is installed on one of the RFP radio units
or on a PC, which constitutes the management interface for the Mitel SIP-DECT solution. Mitel 600 DECT
phones have loaded a different firmware in an Mitel SIP-DECT system from the one in an MiVoice Office
400 DECT system.
The firmware for the RFP radio units and for the Mitel 600 DECT cordless phones is preferably located on
a firmware server. Automatic firmware update is then possible. The WebAdmin Configuration / System /
DECT/SIP-DECT / SIP-DECT view contains a global predefined Mitel FTP (Mitel 6700 SIP phones, Mitel
Blustar clients and Mitel Dialer) / HTTPS (Mitel SIP 6800/6900 phones) server. Various firmware versions
are stored on this server, according to different communication server software releases. The predefined
entry in WebAdmin is adjusted to each communication server release if necessary. You can also indicate
the address of another firmware server.
Firmware designations for Mitel SIP-DECT (examples):
aafon6xxd.dnld:
Firmware for Mitel 600 DECT cordless DECT phones.
iprfp3G.dnld:
iprfp4G.dnld
Firmware for OpenMobilityManager (OMM).
Release 7.1
System Manual for Mitel SMB Controller
Operation and Maintenance
200